1 -
From the
Devices configuration window, select the
button.
The Miscellaneous
section is hidden in the case of using the KT-400 system because the items
are already defined in the Gateway/KT-400 events.
2 - Select a Site filter from the first drop-down list.
3 - select the Gateway.
4 - From the
drop-down list, select the connection where the controller is located.
5 - From the
drop-down
list, select the output you want to define. Once selected, the language
section is enabled. You may rename the selected output.
6 -
From the General tab, specify
the
for
the output device (default is
Normal
):
•
: The
output is switched to ground when it is activated.
•
: The
output is an open circuit (not grounded) when it is activated.
7 -
In the
section, select which door will affect the output you are configuring:
•
: Only
the first door port will follow the state programmed for these events.
•
: Only
the second door port will follow the state programmed for these events.
This option
is not available with KT-100 and KTES.
8 -
Set the
.
It defines the activation time in seconds during which the output remains
active when it is programmed for a temporary activation. An e will leave
the output activated indefinitely, regardless of the activation type.
Values range from 1 sec to 4 min:15 secs. Default is 5 secs.
This option
is not available when you are using the KT-400 or the KTES.
If
you
are
using the Video Integration feature, EntraPass enables you to assign all
system components into a video view, the same way you assign them to a
system interactive floor plan (graphic). To do this, you simply select
the video view where you want the system component (Workstation, site,
gateway, controller, etc.) to appear.
Defining
General Options for an Output
Related Topics